ASP 100WP

100% Solids Rapid-Curing Polyaspartic Resin

  • Ideal for Clear Coats, Grind & Seals, and Top Coats (over flake)
  • Tolerant to moisture (MC will need to be less than 7%)
  • Technical Pot Life 15 minutes @ 25°C (100ml mix)
  • Finish: Clear
  • Gloss: Gloss
  • Tack Dry after 4 hours @ 25°C Substrate Temp
  • Hard Dry after 10 hours @ 25°C Substrate Temp
  • Can be sprayed
  • Minimum Recoat Time 2.5 hours @ 25°C Substrate Temp
  • Maximum Recoat Time 12 hours @ 25°C Substrate Temp
  • Highly UV Resistant
  • Can be pigmented
  • Kit sizes 8L, 20L
  • Available in Clear (Gloss)

ASP 90

90% Solids Polyaspartic Resin

  • Ideal for Clear Coats, Grind & Seals, and Top Coats (over flake)
  • Tolerant to moisture (MC will need to be less than 7%)
  • Technical Pot Life 20 minutes @ 25°C (100ml mix)
  • Finish: Clear / Pigmented
  • Gloss: Gloss
  • Tack Dry after 1 hour @ 25°C Substrate Temp
  • Hard Dry after 3.5 hours @ 25°C Substrate Temp
  • Cure Time: 24 hours (95%), 48 hours (full cure)
  • Recoat Time: 1-4 hours @ 25°C Substrate Temp
  • Highly UV Resistant
  • Kit Sizes: 8L, 20L
  • Pigment Packs: 1L
  • Available in: Clear, White, Grey, Black, Red, Yellow, Gold Rush, Blue
Buy ASP 90 on Floor & Flake Direct

ASP 80

80% Solids Polyaspartic Resin

  • Ideal for Clear Coats, Grind & Seals, Top Coats (over flake), Base, and Primer Coats
  • Tolerant to moisture (MC will need to be less than 7%)
  • Technical Pot Life 45 minutes @ 25°C (100ml mix)
  • Typically applied at 50-100 Microns DFT
  • Finish: Clear / Pigmented
  • Gloss: Gloss
  • Tack Dry after 3 hours @ 25°C Substrate Temp
  • Hard Dry after 7 hours @ 25°C Substrate Temp
  • Full Cure at 3 Days
  • Recoat Time: 3-12 hours @ 25°C Substrate Temp
  • Highly UV Resistant
  • Kit sizes 12L
  • Available in: Clear, White, Grey, Black, Red, Yellow, Gold Rush, Blue

ASP M53

53% Solids Polyaspartic Resin (Matte)

  • Ideal for Clear Coats, Grind & Seals, and Top Coats (over flake)
  • Tolerant to moisture (MC will need to be less than 7%)
  • Technical Pot Life: 60 minutes @ 25°C (100ml mix)
  • Typically applied at 75 Microns DFT
  • Finish: Clear
  • Gloss: Matte
  • Tack Dry after 1.5 hours @ 25°C Substrate Temp
  • Hard Dry after 4 hours @ 25°C Substrate Temp
  • Full Cure at 3 Days
  • RECOMMENDED TO BE APPLIED OVER 1-2 COATS OF ASPART-X 80 / 90 / 100WP
  • Recoat Time: 4-24 hours @ 25°C Substrate Temp
  • Highly UV Resistant
  • Kit sizes 20L
  • Available in Clear